お手入れとメンテナンス
Noyer のすべての製品はウォールナット材で作られており、丁寧にお手入れし適切にメンテナンスすることで、長くお使いいただけます。このページでは、日常のお手入れ、オイル処理、組み立てに関するアドバイスをご紹介しています。これは私たちが自社工房で実際に使用している方法と材料に基づいています。
木製品のメリット
木材は生きている素材であり、家庭に温かみ、個性、そして耐久性をもたらします。耐摩耗性に優れ、見た目にも美しいため、長く使われる機能的な製品に最適です。
日常のお手入れ
Noyer の製品を普段から美しく保つのに多くの手間はかかりません。適切なお手入れをすることで木材の乾燥を防ぎ – 長く美しい表面を保てます。
日常的にどうやって掃除するの?
軽く湿らせた布を使用してください – 必要に応じて少量の中性洗剤を使ってもかまいません – その後は乾いた布で水分を拭き取ります。棚、ナイフマグネット、テーブル、椅子すべてに同じ方法を使えます。
洗剤を使っても大丈夫?
必要な場合のみ中性洗剤を使用してください。強い洗剤は木材のオイルを落としてしまい、表面がくすんだり灰色っぽくなったりします – 最悪の場合、木が乾燥して割れてしまうこともあります。
水は大丈夫?
いいえ – 木材は長時間濡れたままにするとよくありません。必ず乾いた布で水分を拭き取り、表面に水を残さないようにしてください。
シミや跡を防ぐには?
液体をこぼしたらすぐに拭き取りましょう – 特にオイル、コーヒー、ワインなどの液体は注意が必要です。表面が濡れたままにならないようにして、湿気が入り込んで跡にならないようにします。最後に乾いた布で拭き取り、木材の上に水分を残さないようにしてください。
木材がくすんだり乾燥して見えたら?
オイルでのお手入れのタイミングかもしれません – 詳しくは次のセクションで説明します。
メンテナンスとオイル処理
時間が経つとウォールナット材は乾燥したり艶がなくなったりすることがあります – 特に頻繁に使ったり直射日光が当たる場合は要注意です。幸い少しのオイルで簡単にリフレッシュできます。ここでは、その方法とポイントを説明します。
どれくらいの頻度でオイル処理すればいい?
It depends on use and product
Cutting boards need oiling more often than, for example, shelves or tables. If the wood feels dry and has taken on a greyish look, it’s time. Most products won’t need a new oil treatment for many years. If you’re unsure, you’re always welcome to contact us.
How do I oil my product properly?
Apply a thin layer of oil with a cloth and spread it evenly over the entire surface. Let the oil soak in for 10–20 minutes, then wipe thoroughly with a clean, dry cloth or an old t-shirt. It’s important that no excess oil remains, as this can leave a sticky or rubbery surface. Wear gloves if you like, and make sure you work in an area where spills don’t matter.
Which oil should I use?
We recommend the same oil we use in production – a food-safe oil that gives the right treatment and protects the wood in the long run. A small bottle is included when you buy one of our products. If you need more, you’re always welcome to contact us at pelle@noyer.dk.
Can I wipe off too much oil?
No, you can’t remove too much. The wood absorbs what it needs – the rest must be wiped away. It’s much more important to remove excess oil than to leave any behind. A dry surface shows that the wood has absorbed what it can.
What happens if I don’t wipe off the oil?
Excess oil can create a greasy or sticky surface that’s hard to make nice again. Always make sure to wipe thoroughly after oiling.
Cutting boards – care and maintenance
Our walnut cutting boards are made to be used – and they only get more beautiful over time. Since they’re often in contact with water and food, they need a little extra care day to day. Here are our best tips for keeping your cutting board looking good and functional for many years.
How do I keep my cutting board nice daily?
Rinse and wash by hand with a bit of mild soap. Always rinse both sides – even if you only used one. Dry it with a tea towel and stand it up to dry straight away.
Can my cutting board go in the dishwasher?
No. Never put it in the dishwasher or leave it soaking – it can damage the wood.
How do I dry my cutting board properly?
Stand it upright so air can circulate around both sides. If it lies flat on a wet surface, it may warp or crack. That’s why we include a stand with our larger cutting boards. The stand makes it easy to store the board upright so it dries properly – and it looks great on your kitchen counter too.
How and when should I oil it?
When the board looks dull or greyish, it’s time for an oil treatment. The oiling process is the same as for other products, but let it soak for 20–30 minutes. Wipe thoroughly afterwards. You can’t wipe off too much oil – but you shouldn’t leave excess oil on the surface.
How do I keep the cutting board looking nice for serving?
If you’d like to keep one side nice for serving, use the back side for cooking and cutting. This way, you always have a clean, presentable side ready for guests. Remember to rinse both sides – even if you’ve only used one.
Give your cutting board new life
Over time, your cutting board will get natural signs of use – for many, that’s part of the charm. You can sand it yourself, but we also offer a refresh service in our workshop.
Contact us if you’re interested.

Brass
We treat our brass with a thin, clear lacquer – except for the JN12 side table, which is oiled instead. Both treatments protect the surface and preserve the golden look. Over time, the brass will develop a patina, especially if exposed to moisture or greasy fingers. To clean it, it’s usually enough to wipe it with a damp cloth. Patina is a natural part of brass’s character and will develop beautifully over time. It’s possible to polish the surface, but we don’t recommend it.

Leather
We use high-quality leather that needs minimal care to stay soft and beautiful. Wipe it with a damp cloth when needed. If the leather starts to look dull or dry, you can apply leather grease – a small tin is included when you buy a chair from us. Apply the grease with a cloth, let it absorb for 20–30 minutes, and wipe off any excess. Don’t worry if any product touches the wood – it won’t do any harm and can simply be wiped away.
Get inspired

Mixing Wood Tones: A Guide to Harmony and Contrast in Interior Design
Master the art of mixing wood tones to create a home with depth and character. Learn how to combine rich walnut with lighter woods through intentional contrast and shared undertones.

The Art of the Arrival: Transforming Your Entryway with a Wall-Mounted Walnut Coat Rack with Shelf
Discover how a wall-mounted walnut coat rack with shelf can transform your entryway into a space of tactile luxury and organized calm through Danish craftsmanship.

Walnut Mug Shelf: A Tribute to the Daily Coffee Ritual
Transform your kitchen into a curated gallery by displaying your favorite ceramics on a handcrafted walnut mug shelf that celebrates the daily coffee ritual.







